what are the considerations of using a citycoco charger?
①The charger can only be used indoors,
②Charging in a closed space or under scorching sun or at a high temperature environment is strictly prohibited. Do not put the charger on a seat cask or inside the rear compartment for charging
③In Case of no charging, do not connect the charger to an AC power supply without load for a long time.
④During charging, if the indicator light is abnormal, there is abnormal smell or the housing of the charger is too hot, please stop charging immediately, and repair or replace the charger.
⑤Do not disassemble or replace the devices inside the charger by yourself.
⑥Do not charge the charger that has been fully charged.
⑦Do not use the charger in an environment with flammable gas, otherwise explosion or fire will be caused.
⑧Do not place the charger near water source or wet it, otherwise fire or electric shock may occur.
⑨In the event that inside parts are exposed due to charger damage caused by collision etc. Don’t touch them with hands, otherwise you may be injured due lo electric shock
Main Technical Parameters:
I .Main technical parameters of the scooter:
|5. Tire specifications:||215/40-l2|
|6. Maximum load:||180kgs|
|7. Design top speed:||≤85km/h (4000w)|
|11.Braking performance(20 km/h):||Dry:≤1m;Wet:≤3m.|
II .Main technical parameters of battery:
|1. Battery type:||Lithium batteries|
|3. Nominal voltage:||60V|
III . Main technical parameters of motor:
|1.Motor models:||Brushless dc motor hub|
|2. Rated power:||1500W/2000W/3000W/4000W|
IV . Main technical parameters of controller:
|1. Current limiting protection value:||70 + 1A|
|2. Under-voltage protection value:||48士0.5V|
V . Charger main parameters:
|1.The input voltage(ac):||100-240VAC50/60HZ|
|2.The output voltage(dc):||67.2~6.0A|
|3. Charging time||3-4 h|